Literature Review: 3D Print on Design Thinking in The Design Process
Abstract
Technological advances in additive manufacturing technology have been growing, one of which in rapid prototype, making prototipe with use technology is three-dimensional (3D) printing, which works by melting thermoplastic material in the making of a model or prototype. The materials used are Polylactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) which are molded by melting by heating the nozel according to the melting point and flowing in layers to form an object or objects. Design thinking is a method with a solution-based approach to solving a problem, with an iterative process to understand users, challenge an assumption, redefine the problem in an effort to identify strategies and alternative solutions to a problem, especially in the design process. Design thinking has five steps in the process, empathize, define, ideate, prototipe and test. This literature review aims to see the influence of the pengerjaan prototipe process in the design thinking method using 3d printing in the design process. The method used in this paper is to use descriptive qualitative research methods by analyzing the existing literature. So it can be concluded that the use of 3d printing in the design thinking method can be a new way of making prototipe in the design process.
Full Text:
PDFReferences
Abrams, M. D. (2003). Where has all the white oak gone?. BioScience, 53(10), 927-939.
Akbar, D. M., and Aidha, Z. (2020). Perilaku penerapan gizi seimbang masyarakat Kota Binjai pada masa pandemi covid-19 tahun 2020. Menara Medika, 3(1) 15-21.
Andriyanti, S., Sinaga, R., and Lubis, R. (2022). Aplikasi ornamen Sumatera Utara kreasi kekinian pada desain busana ready-to-wear dengan teknik sablon printing. Gorga: Jurnal Seni Rupa, 11(1), 25-35.
Amri, A. A. N., and Sumbodo, W. (2018). Perancangan 3D printer tipe core xy berbasis fused deposition modeling (FDM) menggunakan software autodesk inventor 2015. Jurnal Dinamika Vokasional Teknik Mesin, 3(2), 110-115.
Breen, J., Nottrot, R., and Stellingwerff, M. (2003). Tangible virtuality—perceptions of computer-aided and physical modelling. Automation in Construction, 12(6), 649-653.
Bjögvinsson, E., Ehn, P., and Hillgren, P. A. (2012). Design things and design thinking: contemporary participatory design challenges. Design Issues, 28(3), 101-116.
Cahyati, S., and Aziz, H. R. (2021). The influence of different slicer software on 3d printing products accuracy and surface roughness. Jurnal Rekayasa Mesin, 12(2), 371–380.
Cahyono, E. A., Sutomo, N., and Hartono, A. (2019). Literatur review; panduan penulisan dan penyusunan. Jurnal Keperawatan, 12(2), 12-12.
Chia, H. N., & Wu, B. M. (2015). Recent advances in 3D printing of biomaterials. Journal of Biological Engineering, 9(1), 1-14.
Dawood, A., Marti, B. M., Sauret-Jackson, V., and Darwood, A. (2015). 3D printing in dentistry. British Dental Journal, 219(11), 521-529.
Dorst, K., and Cross, N. (2001). Creativity in the design process: co-evolution of problem–solution. Design Studies, 22(5), 425-437.
Greenhalgh, S. (2016). The effects of 3D printing in design thinking and design education. Journal of Engineering, Design and Technology, 14(4), 752–769
Schubert, C., Van Langeveld, M. C., and Donoso, L. A. (2014). Innovations in 3D printing: A 3D overview from optics to organs. British Journal of Ophthalmology, 98(2), 159-161.
Gupta, S., and Sharma, M. (2014). International journal of advances in computer science and technology generalization of secret sharing scheme using python. International Journal, 3(2), 96–99.
Imaduddin, M., Ihsan, I., Shofyan, M. A., Shofa, M. M., Riza, M. F., Fitriani, N. L., and Dewi, R. U. (2022). Strengthening pre-service science teachers’ entrepreneurial self-efficacy through design thinking process on the eco-printing steam-project. Journal of Education in Science Environment and Health, 8(4), 320-332.
Kimbell, L. (2011). Designing for service as one way of designing services. International Journal of Design, 5(2), 41-52.
Koberg, C. S., Detienne, D. R., and Heppard, K. A. (2003). An empirical test of environmental, organizational, and process factors affecting incremental and radical innovation. The Journal of High Technology Management Research, 14(1), 21–45.
Lee, J. Y., An, J., and Chua, C. K. (2017). Fundamentals and applications of 3D printing for novel materials. Applied Materials Today, 7, 120-133.
Lewis, A., and Smith, D. (1993). Defining higher order thinking. Theory Into Practice, 32(3), 131–137.
Marpaung, J. (2018). Pengaruh penggunaan gadget dalam kehidupan. KOPASTA: Journal of the Counseling Guidance Study Program, 5(2), 55-62.
Matthee, M., and Turpin, M. (2019). Teaching critical thinking, problem solving, and design thinking: Preparing IS students for the future. Journal of Information Systems Education, 30(4), 242-252.
Medellin-Castillo, H. I., and Zaragoza-Siqueiros, J. (2019). Design and manufacturing strategies for fused deposition modelling in additive manufacturing: A review. Chinese Journal of Mechanical Engineering, 32(1), 1-16.
Mufti, D., Duskiardi, D., and Zoni, M. (2019). Pemanfaatan teknologi dalam upaya mengantisipasi musculoskeletal disorders (MSDS) petani di Kube Usaho Basamo. JMM-Jurnal Masyarakat Merdeka, 2(2), 20-24.
Muliyawan, M. D. (2017). Rancang bangun konstruksi rangka mesin 3D printer tipe cartesian berbasis fused deposition modeling (FDM). Jurnal Teknik Mesin, 6(4), 252 - 257.
Naâ, M. F. (2018). Kearifan lokal motif batik Semarang sebagai ide dasar model kreatif desain kaus digital printing. TEKNOBUGA: Jurnal Teknologi Busana dan Boga, 6(1), 16-34.
Nagai, Y., and Noguchi, H. (2003). An experimental study on the design thinking process started from difficult keywords: Modeling the thinking process of creative design. Journal of Engineering Design, 14(4), 429-437.
Noviadji, B. R., and Hendrawan, A. (2021). Perancangan buku ilustrasi sebagai media pengenalan bidang keilmuan desain. Jurnal Desain, 8(2), 103 - 121.
PB, S. N., Andeas, A., and Nugroho, J. A. (2021). Pengembangan “jurnal proses desain” sebagai media pembelajaran perancangan desain. Jurnal Desain, 9(1), 131-142.
Nurul Amri, A. A., and Sumbodo, W. (2018). Perancangan 3D printer tipe core xy berbasis fused deposition modeling (FDM) menggunakan software autodesk inventor 2015. Jurnal Dinamika Vokasional Teknik Mesin, 3(2), 110–115.
Saputra, O. A., and Sudiro, S. (2019). Pengenalan printing 3D dan software autodesk fusion untuk guru dan siswa SMK di eks karisidenan Surakarta. Indonesian Journal of Community Services, 1(1), 83-94.
Šál, J., and Dědič, M. (2020). Application of modeling processes and 3D print on casting molds for concrete furniture. IOP Conference Series: Materials Science and Engineering, 728(1), 1–6.
Saxena, A., and Kamran, M. (2016). A comprehensive study on 3D printing technology. MIT International Journal of Mechanical Engineering, 6(2), 63-69.
Schubert, C., Van Langeveld, M. C., and Donoso, L. A. (2014). Innovations in 3D printing: a 3D overview from optics to organs. British Journal of Ophthalmology, 98(2), 159-161.
Shahrubudin, N., Lee, T. C., and Ramlan, R. J. P. M. (2019). An overview on 3D printing technology: Technological, materials, and applications. Procedia Manufacturing, 4(35), 1286-1296.
Susanto, A., and Siahaan, D. O. (2015). Metrik ergonomi untuk produk perangkat lunak permainan pada aspek kenyamanan. Melek IT Information Technology Journal, 1(1), 7-14.
Sutisna, N. A., and Tjong, W. S. (2021). Pengembangan mesin 3D printing sebagai alternatif pembangunan rumah yang lebih efisien: Pengembangan mesin 3D printing sebagai alternatif pembangunan rumah yang lebih efisien. Media Teknik Sipil, 19(2), 105-116.
Syahrul, Y. (2019). Penerapan design thinking pada media komunikasi visual pengenalan kehidupan kampus bagi mahasiswa baru STIMK Palcomtech dan Politeknik Palcomtech. Jurnal Bahasa Rupa, 2(2), 109–117.
Szulżyk-Cieplak, J., Duda, A., and Sidor, B. (2014). 3D printers – new possibilities in education. Advances in Science and Technology Research Journal, 8(24), 96–101.
Wang, T. M., Xi, J. T., and Jin, Y. (2007). A model research for prototype warp deformation in the FDM process. International Journal of Advanced Manufacturing Technology, 33(11–12).
Wantini, S., and Sulistianingsih, E. (2019). Hubungan higiene sanitasi terhadap telur nematoda usus pada lalapan mentah di warung pecel lele sepanjang jalan pagar alam Bandar Lampung. Jurnal Analis Kesehatan, 8(1), 1-6.
Yuk, H., Lu, B., Lin, S., Qu, K., Xu, J., Luo, J., and Zhao, X. (2020). 3D printing of conducting polymers. Nature Communications, 11(1), 1604-1610.
DOI: https://doi.org/10.17509/jipdrs.v1i1.47469
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Universitas Pendidikan Indonesia (UPI)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.