THE INFLUENCE OF WORKERS AND WORK COMMITMENTS OF WOODEN HOUSE CRAFTSMEN ON WOOD WASTE MANAGEMENT BEHAVIOR IN THE WOODEN INDUSTRY TANJUNG BATU SEBERANG VILLAGE TANJUNG BATU DISTRICT – OGAN ILIR REGENCY

Muhammad Restu Zarkasih, Retno Susanti, Azwardi Azwardi

Abstract


The purpose of this study was to examine the influence of workers and work commitments of wooden house craftsmen on wood waste management behavior in the wooden industry Tanjung Batu Seberang Village Tanjung Batu District – Ogan Ilir Regency which is the village that produces the biggest wooden houses in South Sumatra Province. The population of this study was 142 people with a sample of 59 respondents which is determined by the Taro Yamane formula. Data were collected using a questionnaire using a Likert measurement scale. The method used in this research is correlation descriptive method, sedangkan teknik analisis data yang digunakan adalah analisis regresi linear berganda. while the data analysis technique used is multiple linear regression analysis. The feasibility of the research instrument is measured by the validity test and the reliability test. While for the classic assumption test using the normality test, multicollinearity test, heterokedasticity test, and the coefficient of determination test (R2). Hypothesis testing uses the simultaneous test (Test F). The results showed that the workers and work commitments of wooden house craftsmen simultaneously affect on wood waste management behavior in the wooden industry. The author recommends that the government of Ogan Ilir Regency to encourage and socialize awareness of the environment. wooden house craftsmen expected to pay more attention in wood waste management and began to think about how to treat wood waste become a useful new item, thus minimizing waste discharged into the environment.


Keywords


Workers, work commitments, behavior, waste, wooden house industry

References


Aisyah. 2013. Karakterisasi Gelas Limbah Hasil Vitrifikasi Limbah Cair Tingkat Tinggi. Jurnal Teknologi Pengelolaan Limbah, 16 (1), 13-22.

Allen dan Meyer. 2013. The Measurement and Antecedents of Affective, Contintinuance and Normative Commitment to Organitazion. PT Elex Media Komputindo, Jakarta.

Arikunto, S. 2012. Prosedur Penelitian Suatu Pendekatan Praktek. Jakarta: Rineka Cipta

Ariawati, R.R. 2004. Usaha kecil dan kesempatan kerja. Fakultas Ekonomi Unikom, Jakarta.

Basaran, B. (2013). What makes manufacturing companies more desirous of recycling? Management of Environmental Quality: An International Journal. 24 (1): 107- 122.

Nurgiyantoro, B. 2012. Penilaian Pembelajaran Bahasa. Yogyakarta: BPFE.

BPS Kabupaten Ogan Ilir, 2017. Kecamatan Tanjung Batu dalam Angka. Indralaya: BPS Kabupaten Ogan Ilir

Fazria, D.A. 2013. Analisis Manfaat Ekonomi Pengelolaan Limbah Serbuk Gergaji. Skripsi : Tidak diterbitkan. Fakultas Ekonomi dan Manajemen. Institut Pertanian Bogor : Bogor

Ghozali, I. 2012. Aplikasi Analisis Multivariate dengan Program IBM SPSS. Yogyakarta: Universitas Diponegoro

Helwi. (2002). Faktor-faktor yang Mempengaruhi Perilaku Petugas Terhadap Penanganan Sampah Medis Di Rumah Sakit Haji Medan Tahun 2001. Skripsi : Tidak diterbitkan. Fakultas Kesehatan Masyarakat. Universitas Sumatera Utara : Medan

Lindaan, M.P., Rantung, V.V. dan Memah, M.Y. 2016. Persepsi Masyarakat terhadap Pengembangan Industri Rumah Panggung di Desa Tombasian Atas, Kecamatan Kawangkoan Barat, Kabupaten Minahasa. AGRI-SOSIOEKONOMI, 12(2A), pp.349-362.

Malik, U. 2012. Penelitian Berbagai Jenis Kayu Limbah Pengelolaan untuk Pemilihan Bahan Baku Briket Arang. Junal Imiah Edu Research. 1(2), 21-26.

Nasir, M., Saputro, E.P. dan Handayani, S. 2016. Manajemen Pengelolaan Limbah Industri. Benefit: Jurnal Manajemen dan Bisnis, 19(2), pp.143-149.

Purwanto. 2007. Metodologi Penelitian Kuantitatif. Yogyakarta: Pustaka Pelajar

Purwanto, D. 2009. Analisa jenis limbah kayu pada industri pengelolaan kayu di Kalimantan Selatan. Jurnal Riset Industri Hasil Hutan, 1(1), pp.14-20.

Rachman O dan Malik J. 2011. Penggergajian dan Pemesinan Kayu untuk Industri Perkayuan Indonesia. Balai Penelitian dan Pengembangan Kehutanan, Jakarta.

Riadi, E. 2016. Statistika Penelitian (Analisis Manual dan IBM SPSS). Yogyakarta: CV. Andi Offset.

Siswanto, A., 2018. Studi Pengembangan Konstruksi Rumah Kayu Sistem Bongkar Pasang Berdasarkan Konsep Struktur Kayu Tradisional Sumatera Selatan The Study of Knock Down Timber Construction House Based on the Concept of South Sumatra Timber House Structure. Jurnal Ilmu dan Teknologi Kayu Tropis, 2(2), pp.103-109.

Stemple Jr, J.D., 2004. Job Satisfaction of High School Principals in Virginia. Unpublished Dissertation. Virginia : Polytechnic Institute and State University.

Susilo, R., Karya, A. 2012. Pemanfaatan Limbah Kain Perca untuk Pembuatan Funitur. Jurnal Tingkat Sarjana Senirupa dan Desain, 3(1), 1-6.

Sugiyono. 2006. Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.

Sutrisno, Edy. 2009. Manajemen Sumber Daya Manusia. Jakarta : Kencana

Sutrisno dan Ariefien. 2017. Hubungan Tingkat Pendidikan Pengrajin Batik Terhadap Pengelolaan Limbah di Desa Babagan Kecamatan Lasem Kabupaten Rembang Tahun 2017. Journal of Edu Geography, Vol. 3 No.2.

Suwandi. 2012. Kebutuhan Kayu Secara Nasional 5 Tahun Terakhir. https://forestryinformation.com. Diakses pada tanggal 1 Juni 2019.

Wardani, R.A.K. dan Sari, D.P. 2017. Pemanfaatan Limbah Gergaji Kayu sebagai Media Tanam Jamur dan Kain Perca untuk Bahan Baku dalam Packaging Fung–Cube. In Proceeding Biology Education Conference: Biology, Science, Enviromental, and Learning (Vol. 14, No. 1, pp. 83-87).

Wibowo, C. 1990. Pengaruh Media Semai Serbuk Gergaji dan Pemupukan terhadap Pertumbuhan Sengon (Paraserianthes falcataria) di Rumah Kaca dan di Hutan Pendidikan IPB, Gunung Walat, Sukabumi. Bogor : Institut Pertanian Bogor.

Wilson, D.C., Parker, D., Cox, J., Strange, K., Willis, P., Blakey, N., dan Raw, L. (2012). Business waste prevention: A review of the evidence. Waste Management & Research. 30 (9): 17-28.

Xue, M., Li, J., dan Xu, Z. (2013). Management strategies on the industrialization road of state of the art technologies for e-waste recycling: the case study of electrostatic separation: A review. Waste Management & Research. 31 (2): 130- 140




DOI: https://doi.org/10.17509/gea.v20i1.23684

DOI (PDF (Bahasa Indonesia)): https://doi.org/10.17509/gea.v20i1.23684.g11796

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 muhammad Restu Zarkasih

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.